Indian Springs Resort – Large Stormwater System

Project Assets

Project Description

The Indian Springs Resort needed a new pump station designed to handle high flows of stormwater runoff from a collection storm drain. This stormwater system was designed with large 40hp Ebara pumps to meet the flow requirements. The large pumps required a large precast concrete wet well with a 10 foot internal diameter. The barrel sections of the well were designed for a penetration from a 30 inch diameter inlet line. This pump station utilities a PC 3000 control panel. Liquid level sensing comprised a primary pressure transducer device and NOLTA floats for redundant level controls.

What Romtec Utilities Provided

  • Lift Station Design & Engineering
  • Package Lift Station Supplier
  • Package Lift Station Manufacturer
  • On-Site Lift Station Construction Adviser
  • On-Site Start-Up Management
9.7 15.7′

Why They Chose Romtec Utilities

Romtec Utilities began working with BKF Engineers representing the Indian Springs Resort in Calistoga, California. The total project scope called for two wastewater lift stations, a stormwater pump station, and a geothermal water flow meter vault. Romtec worked with BKF Engineers and the Indian Springs Resort to design and manufacture all four systems to meet approval from the City. Carlisle Construction was the installing contractor and Romtec Utilities worked with them to deliver and install this system on-time. Romtec Utilities also provided onsite commissioning of the systems with training for the Indian Spring Resort operators.

Calistoga, CA|9.7 MGD – 15.7′ TDH