Detention Pond Pumping
Simple, Effective Detention Pond Pumping Solutions
Get Engineering Expertise for Stormwater Detention Pond Pumping
We can pump to and from detention and retention ponds with expert pump station designs that will function to meet your needs on your specific site. Our experience will help you get a long-term pump station solution for the management of your detention pond.
Our Pump Stations Will Pump at Rates that Meet Your Needs
Your detention pond might fill and require to be emptied at a specific pumping rate. Your detention pond might also need to pump to “keep up” with major storm events. Romtec Utilities will design your detention pond pump station to function perfectly in your required conditions.
We Prefabricate Major Pump Station Assemblies for Easy Installation
Romtec Utilities completes many levels of prefabrication work on your stormwater pump station. When your shipment arrives on-site, it is ready for installation at the detention pond. We keep your project moving and your site contractors on schedule.
Complete Design Engineering with O&M Documentation
Your system will be engineered with comprehensive documentation complete with component specifications and datasheets, scope of supply, and our full scope of services. You will also receive O&M documents for the long-term operation and training of your stormwater pump station.
View Detention Pond Projects
Union Pacific Railroad | Replacement Water Collection System
4000 GPM | 25′ TDH
The Union Pacific Depot in Cheyenne, Wyoming needed two new stormwater pump stations to replace existing systems. Both stormwater systems discharge into an evaporation pond that was installed as a part of this larger water collection replacement, which also included three additional Romtec Utilities wastewater lift stations.
Public Service Enterprise Group | Industrial Stormwater Pump Station
225 GPM | 11.7′ TDH
Romtec Utilities was contacted to design and supply a stormwater pump station as part of an improvement project at an industrial power switch station in Trenton, New Jersey. This is one of several locations where aging infrastructure is being replaced by the local electric company, Public Service Enterprise Group, or PSE&G.
Walmart in Gardnerville, Nevada | Stormwater Detention Pond Pumping
1300 GPM | 23.4′ TDH
A new Walmart Supercenter required this package stormwater pump station to handle runoff from its large impervious parking lot. A good sized detention basin collects the runoff water during a storm event, including from surrounding properties.
Home Depot in Perris, California | Commercial Stormwater Pumping
900 GPM | 16′ TDH
The construction of a new Home Depot required a large detention pond and a new pump station to handle stormwater from the commercial development. This economical pump station uses 7.5hp Ebara pumps in a duplex configuration to meet the required flow rates to empty the detention pond.
Sacramento Municipal Utility District | Deep Well Sewer Lift Station
172 GPM | 94′ TDH
The newly constructed headquarters for the Sacramento Municipal Utility District purchased this package lift station to meet its medium sewage flow requirements. Submersible solids-handling pumps in a duplex configuration were specified in a deep well because this facility represents one of the ten largest public utilities in the country.
California State University Channel Islands | Stormwater Pump Station
2500 GPM | 25′ TDH
A university needed this package stormwater pump station designed to meet the high flow requirements for draining a detention pond. A flooded inlet line from the detention pond is pumped by submersible centrifugal pumps in a duplex configuration.
Getting a Stormwater Detention Pond
Engineering
Romtec Utilities provides full engineering and design services to meet the specific goals of your project. Romtec Utilities’ Engineers are experts in water conveyance systems across a wide array of water types and applications. We work with our clients through every step of the process, from preliminary designs and budgetary estimates, submittal and review processes, installation, and all the way through start-up, training, and warranty.
Project Support
With Romtec Utilities you gain the support of our dedicated project management team at every step-from planning through installation. Romtec Utilities covers a vast scope of services that help execute the design, supply, construction, testing, and training of your pump system to ensure its success at the site location.
Manufacturing
Romtec Utilities provides a high level of system prefabrication prior to delivery of the system to the jobsite. This greatly reduces construction cost and installation time, as well as potential project delays and change orders. This high level of prefabrication can often reduce installation time from weeks to days. Additionally, Romtec Utilities takes pride in our quality control processes, ensuring that when the system is delivered to the job site everything will function as designed.
Construction
Romtec Utilities ensures the quality and success of every pumping system from the early stages of design, all the way through installation and construction. Romtec Utilities will send experienced installation advisors to the site who will advise the installing contractor throughout the installation process providing all parties with the reassurance that the station is constructed and ultimately functioning as designed.
Commissioning
Romtec Utilities’ startup, testing, and training services are essential to the success of any pumping system. Following installation our technicians are on-site working directly with all parties to field check the control panel, operate the pumps, perform system testing, and provide world class training to all maintenance personnel.
Warranty
With Romtec Utilities, every complete pump station is covered with a standard one-year warranty. Romtec Utilities also provides ongoing support from our entire team throughout the lifetime of our products. This support is provided to ensure that every pump and lift station project is successful.