Oil & Gas
Recent Projects
City of Niagara Falls| Hydrogen Refinery Pump Station
As the clean energy sector grows across the United States, Romtec Utilities is proud to have designed and supplied a hydrogen refinery pump station for a 35-megawatt Proton Exchange Membrane electrolyzer in Niagara Falls, New York.
McIntosh, Alabama | Industrial Process Lift Station
The industrial stormwater pump station is for a hydrogen facility in McIntosh, Alabama where most of the inflow will be stormwater along with some condensed steam from process drains. Therefore, the temperature will be high on occasion, but the pumping environment is not corrosive or caustic.
Oil & Gas
City of West Lafayette | Oil Water Separator
Romtec Utilities provided an oil water separator for a new power plant in West Lafayette, Indiana where Duke Energy and Purdue University worked together to build a combined heat and power plant near the Purdue campus. The plant will power Purdue University along with customers in Indiana using a HRSG (heat recovery steam generator).
City of West Lafayette | Hot Sump Basin
Romtec Utilities engineered a hot sump basin lift station for a new combined heat and power facility located on the Purdue University campus in West Lafayette, Indiana. The hot sump basin wastewater lift station handless process drains from the Heat Recovery Steam Generator (HRSG), operating in a caustic and high-temperature environment.
City of West Lafayette | Wash Drains Basin
The wash drains basin is located near the combustion turbine generator and it pumps fluid that comes from the engine wash water drains on the combustion turbine with a max fluid temperature of 190 degrees Fahrenheit. The vault is a precast concrete with liner, and a non-slip carbon steel hatch, with an 80 to 100 gallon working volume.
Gulf Coast Growth Ventures | Wastewater Pump Station
The site of the new development is close to the Santa Clara River, driving the need for all the stormwater runoff to be collected and treated in order to keep contaminated water from making its way into the Santa Clara.
Gulf South Pipeline Company | Stormwater Pump Station
50 GPM | 15.1′ TDH
The Westlake Compressor Stormwater Pump Station in Louisiana is just one of three recent Romtec Utilities projects for the Gulf South Pipeline Company, also known as the Boardwalk Pipeline partners.
Boardwalk Pipeline Partners | Midstream Pipeline Stormwater Pump Station
100 GPM | 11′ TDH
Romtec Utilities provided a packaged stormwater pump station at a midstream metering facility along a natural gas pipeline in Freeport, Texas.
Utica East Ohio Midstream LNG Plant | Double-Wall Fiberglass Sumps
75 GPM | 67′ TDH
Utica East Ohio Midstream needed two new pump stations to handle low flows of stormwater runoff at its new Kensington Plant in Ohio. To responsibly contain potentially hazardous stormwater from the topsoil, these pump stations were designed with double-wall fiberglass wet wells with interstitial leak detection.
Marathon Petroleum | Oil Refinery Process Wastewater
75 GPM | 125′ TDH
The Marathon Petroleum Refinery in Robinson, IL needed this new industrial process water pump station to handle its medium flows of highly acidic water combined with standard wastewater.
Utica East Ohio Midstream LNG Plant | Double-Wall Fiberglass System
150 GPM | 59′ TDH
Utica East Ohio Midstream needed a new pump station to handle low flows of stormwater runoff at its new Kensington Plant in Ohio. To responsibly contain potentially hazardous stormwater from the topsoil, this pump station was designed with a double-wall fiberglass wet well with interstitial leak detection.
Plantation Pipe Line | Low-Cost Stormwater Pump Station
175 GPM | 90′ TDH
This package stormwater lift station was configured to meet the medium runoff flow of this industrial property. One submersible centrifugal pump makes this a simplex station with an in-well check valve. The single pump handles high head conditions caused by 9,000 feet of 4” force main.
Praxair, Inc. | Super-High Flow Industrial Lift Station
1800 GPM | 33.5′ TDH
A liquid hydrogen plant required this large 20’ deep lift station to handle super-high flows of industrial wastewater. In order to provide redundancy and expanded pumping capabilities, triplex submersible centrifugal pumps were specified in the 8’ diameter sump.
Dow Chemical Company | Replacement Fiberglass Lift Station
50 GPM | 90′ TDH
This package wastewater lift station replacement was delivered largely preassembled for quick and simple installation by the customer. This procedure provided an expertly designed lift station that would uphold the privacy values of the facility.
Tesoro Corporation | Oil/Water Separator Stormwater Pump Station
400 GPM | 30′ TDH
A remote Tesoro Corporation industrial site needed this stormwater pump station to handle water discharged from an oil/water separator which processes on-site runoff. Submersible centrifugal pumps were used in a duplex configuration in this shallow wet well.
British Petroleum Cherry Point Refinery | Industrial Stormwater Runoff
350 GPM | 30′ TDH
This package lift station handles the medium flows of stormwater and process water drainage at this oil refinery. A stormwater plan is required at most industrial facilities and BP proactively chose a reliable lift station to manage its environmental footprint.
Dow Chemical Company Louisiana Operations | Prefabricated Pump Station
8500 GPM | 32′ TDH
This package pump station was designed to respect the confidentiality of this industrial facility. The entire system was delivered with much of the hardware preinstalled in the fiberglass wet well to facilitate simple, “drop-in” installation.
Praxair Hydrogen Refinery | Self-Priming Pumping Skid
540 GPM | 280′ TDH
This packaged pump station was the second of two pump stations supplied for industrial process water and stormwater at two Valero oil refineries. The design criteria specified varying flows which required a duplex pump configuration with an included “jockey” pump to handle the smaller flows.
Ajax Gas Plant | Industrial Stormwater and Process Water
200 GPM | 50′ TDH
This package pump station was designed to meet a low flow of industrial process water with added low flows of industrial stormwater. The dual purposes of this pump station required shaft-driven centrifugal pumps with the motors located above-grade.
Praxair Hydrogen Refinery | Mixed Industrial Water Pump Station
562 GPM | 200′ TDH
This was the first of two packaged pump stations needed to handle varying flows of industrial process water and stormwater at a hydrogen refinery. Submersible centrifugal pumps in a duplex configuration also included a submersible “jockey” pump.