Oil & Gas

Pumping Systems for Metering Sites & Processing Plants

Fiber Glass Wet Well for the Dow Chemical Wastewater Plant

Get a Pumping System to Handle Any Type of Water at Oil & Gas Plants

Wastewater, stormwater, process water, cleaning, and many other types of water can require pumping at Oil and Gas plants. Romtec Utilities develops these types of systems to pump to and from treatment. Whether onsite, private, public, or at sites that require storage and trucking. Romtec is experienced with Oil and Gas plant pumping needs.

Romtec Delivers High Safety Standards On All of Our Pumping Systems

Romtec Utilities provides safety features like reliable fall protection and safety grates, limited access to confined spaces, above-grade manifolds, isolated power service disconnects, and much more. For oil and gas plants, we always make sure to put operator safety at the forefront of our pumping systems.

Romtec Includes All Types of Oil & Gas Accessory Options for Your Pump Stations

Romtec Utilities is familiar with many requirements when pumping water at oil and gas plants. Accessory options may be needed, such as oil skimmers, oil/water separators, flow meters, and others. We provide prefabricated assemblies that can be integrated into any oil and gas pumping system.

Our Detailed Engineering Documents are Trusted by Oil & Gas Engineers

Romtec pumping systems are designed to meet specific requirements supplied by your engineers. We develop complete engineering documents with component data sheets, site plan equipment layouts, scope of supply, and scope of services to detail the whole system for your engineers to review and approve.

View Oil & Gas Projects

Gulf Coast Growth Ventures
Gulf Coast Growth Ventures | Wastewater Pump Station

The site of the new development is close to the Santa Clara River, driving the need for all the stormwater runoff to be collected and treated in order to keep contaminated water from making its way into the Santa Clara.

Gulf South Pipeline
Gulf South Pipeline Company | Stormwater Pump Station
50 GPM | 15.1′ TDH

The Westlake Compressor Stormwater Pump Station in Louisiana is just one of three recent Romtec Utilities projects for the Gulf South Pipeline Company, also known as the Boardwalk Pipeline partners.

Boardwalk Pipeline Partners
Boardwalk Pipeline Partners | Midstream Pipeline Stormwater Pump Station
100 GPM | 11′ TDH

The City of Los Angeles needed to construct a new 54” force main to increase sewer capacity and add redundancy to an existing 48” force main at Marina del Rey.

Marathon Petroleum | Oil Refinery Process Wastewater
75 GPM | 125′ TDH

The Marathon Petroleum Refinery in Robinson, IL needed this new industrial process water pump station to handle its medium flows of highly acidic water combined with standard wastewater. A precast concrete sump included an interior Tnemec coating to withstand the water chemistry from a refinery testing lab.

Momentum 400X400
Utica East Ohio Midstream LNG Plant | Double-Wall Fiberglass System
150 GPM | 59′ TDH

Utica East Ohio Midstream needed a new pump stations to handle low flows of stormwater runoff at its new Kensington Plant in Ohio. To responsibly contain potentially hazardous stormwater from the topsoil, this pump station was designed with a double-wall fiberglass wet well with interstitial leak detection.

Tesoro Oil and Water Separator Pump
Tesoro Corporation | Oil/Water Separator Stormwater Pump Station
400 GPM | 30′ TDH

A remote Tesoro Corporation industrial site needed this stormwater pump station to handle water discharged from an oil/water separator which processes on-site runoff. Submersible centrifugal pumps were used in a duplex configuration in this shallow wet well.

Getting an Oil & Gas System



Romtec Utilities provides full engineering and design services to meet the specific goals of your project. Romtec Utilities’ Engineers are experts in water conveyance systems across a wide array of water types and applications. We work with our clients through every step of the process, from preliminary designs and budgetary estimates, submittal and review processes, installation, and all the way through start-up, training, and warranty.


Project Support

With Romtec Utilities you gain the support of our dedicated project management team at every step-from planning through installation. Romtec Utilities covers a vast scope of services that help execute the design, supply, construction, testing, and training of your pump system to ensure its success at the site location.



Romtec Utilities provides a high level of system prefabrication prior to delivery of the system to the jobsite. This greatly reduces construction cost and installation time, as well as potential project delays and change orders. This high level of prefabrication can often reduce installation time from weeks to days. Additionally, Romtec Utilities takes pride in our quality control processes, ensuring that when the system is delivered to the job site everything will function as designed.



Romtec Utilities ensures the quality and success of every pumping system from the early stages of design, all the way through installation and construction. Romtec Utilities will send experienced installation advisors to the site who will advise the installing contractor throughout the installation process providing all parties with the reassurance that the station is constructed and ultimately functioning as designed.



Romtec Utilities’ startup, testing, and training services are essential to the success of any pumping system. Following installation our technicians are on-site working directly with all parties to field check the control panel, operate the pumps, perform system testing, and provide world class training to all maintenance personnel.



With Romtec Utilities, every complete pump station is covered with a standard one-year warranty. Romtec Utilities also provides ongoing support from our entire team throughout the lifetime of our products. This support is provided to ensure that every pump and lift station project is successful.