Other Water

takara sake
Takara Sake USA Inc. | Food-Process Pump Station
400 GPM

In the Takara Sake project, Romtec Utilities supplied an industrial food-process pump station to Takara Sake USA Inc., a Sake manufacturer based in Berkeley, California.

Clark County Water Reclamation District
Clark County Water Reclamation District | Wastewater & H2S Capable Lift Station
70 GPM | 47′ TDH

Romtec Utilities designed and supplied a wastewater lift station for a housing development in Las Vegas, Nevada. Romtec Utilities worked with the developer, Summit Club Nevada, and the local water authority, Clark County Water Reclamation District (CCWRD), to design the system according to their design requirements.

calpine-energy
Russel City Energy Center | Demineralized Process Water Pumping System
1350 GPM | 15′ TDH

Romtec Utilities was contacted to help on the design of an industrial pump station that would handle demineralized process water at the Russel City Energy Center in Hayward, California.

Department of Energy Handford Top Slab Retrofits
Department of Energy | Top Slab Retrofits

A secure Department of Energy facility in Richland, Washington required multiple top slabs to retrofit existing pump stations. Romtec Utilities designed and supplied 7 custom slabs with hatches suitable for the specific conditions of each pump station, including industrial process water and wastewater.

Orlando Utility Commission
Orlando Utility Commission | HRSG Blowdown Pump Station
100, 800 GPM | 85.6′, 135′ TDH

Romtec Utilities was hired to design and supply pump stations to support a combined-cycle power generation process that requires significant amounts of recirculated water to function for the Orlando Utility Commission in Orlando, FL.

exelon-400x400
Exelon West Medway Generating Station | Power Plant Pumping Systems
30 – 70 GPM | 10′ – 35′ TDH

The expansion of the Exelon Medway Generating Station required four unique pump stations to support future operations.

Kings Mountain Energy Center
Kings Mountain Energy Center | HRSG Blowdown Pumping
480 GPM | 35′ TDH

A new HRSG system required 3 industrial pump stations to provide water for its processes. This HRSG blowdown pump station needed to handle extreme pumping conditions.

Kings Mountain Energy Center
Middletown Energy Center | HRSG Blowdown and Process Pumping
480-850 GPM | 25′-35′ TDH

Construction of a new combined cycle power plant in Middletown, OH required 3 pump stations for the operation of its HRSG system. Middletown Energy Center uses natural gas and HRSG to generate power, this process requires significant amounts of water for operation.

Kings Mountain Energy Center
Middletown Energy Center | HRSG Water Treatment Pump Station
40 GPM | 25′ TDH

Construction of a new combined cycle power plant in Middletown, OH required 3 pump stations for the operation of its HRSG system. Middletown Energy Center uses natural gas and HRSG to generate power, this process requires significant amounts of water for operation.

Dan-River-Steam-Station
Dan River Steam Station | Combined Cycle Blow Down Pumping
300 GPM | 20′ TDH

Duke Energy replaced the Dan River Steam Station with a new gas fired power plant and needed a new pump station to handle medium flows of blow down water from the heat recovery steam generator.

Marathon-Logo
Marathon Petroleum | Oil Refinery Process Wastewater
75 GPM | 125′ TDH

The Marathon Petroleum Refinery in Robinson, IL needed this new industrial process water pump station to handle its medium flows of highly acidic water combined with standard wastewater.

bae
BAE Acetic Acid Plant | Corrosive Water Pumping Skid
300 GPM | 30′ TDH

BAE Systems, Inc. needed a new pumping system that could handle medium flows of industrial wastewater that was also skid mounted.

MERCK Animal Health
Merck Animal Health | Industrial Wastewater with Variable pH
100 GPM | 21′ TDH

This industrial pumping system was designed to handle medium flows of process wastewater created from cleaning cycles at the Merck Animal Health facility. The wastewater was specified with highly variable pH conditions, so the pumping system was designed with a double-wall fiberglass sump with leak detection.

International-Matex-Tank-Terminals-
International-Matex Tank Terminals | Oily Stormwater Runoff Pumping
770 GPM | 35′ TDH

An IMTT industrial storage facility needed this stormwater pump station to collect runoff and pump it to treatment onsite. The duplex submersible pumps were engineered to handle the expected medium flows of stormwater.

California Institute for Men
California Institute for Men | Brine Wastewater Pumping Station
135 GPM | 30′ TDH

This package lift station was designed to meet the medium wastewater flows of this California prison. Solids-handling pumps in a duplex configuration are protected from cascading influent by a drop bowl. The liquid level-sensing is controlled by a pressure transducer and a float in used for emergency backup.

Untitled-1
Praxair Hydrogen Refinery | Self-Priming Pumping Skid
540 GPM | 280′ TDH

This packaged pump station was the second of two pump stations supplied for industrial process water and stormwater at two Valero oil refineries. The design criteria specified varying flows which required a duplex pump configuration with an included “jockey” pump to handle the smaller flows.

Basin-Electric-Power
Basin Electric Power Cooperative | Clean Water Industrial Pumping
130 GPM | 45′ TDH

The Groton Generating Station needed this package lift station to pump clean water as a part of its power generating processes from natural gas. The submersible centrifugal pumps in a duplex configuration meet the pumping requirements for this facility and discharge the water to parallel force mains.

Untitled-1
Praxair Hydrogen Refinery | Mixed Industrial Water Pump Station
562 GPM | 200′ TDH

This was the first of two packaged pump stations needed to handle varying flows of industrial process water and stormwater at a hydrogen refinery. Submersible centrifugal pumps in a duplex configuration also included a submersible “jockey” pump.

Oxy 2
Occidental Petroleum at Elk Hills, Inc. | Industrial Water Reuse
200 GPM | 115′ TDH

This package pump station was configured to meet the medium flow requirements for this clean water power generation process and reuse system. The system has a large precast-concrete rectangular sump with a barrier wall –or weir wall- to reduce turbulence for the pumps.