The Marine Corps Base Camp Pendleton needed this large wet-dry wastewater lift station to replace an existing system to allow the construction of new enlisted quarters. The new lift station included triplex dry-pit pumps to handle super-high flows of sewage from the facilities. An 8’ diameter precast concrete sump collects the sewage. Suction lines connect the sump to a 200-square-foot rectangular dry pit where the pumps, flow meter, and valve assembly are located. This lift station also includes an upstream grinder pit with a Macho Monster sewage grinder to pulverize solids into passable sizes.
The City of Arcata | Arcata, CA | 2,947 GPM - 34.2' TDH
This “turnkey” replacement lift station was designed, supplied, and installed to meet super-high sewage flow with infiltration and inflow requirements of a municipal wastewater lift station. Submersible solids-handling pumps in a triplex configuration were installed. The below-grade valve assembly includes plug valves, check valves, ball valves, a pumping port, and a pigging port. The UL listed control panel has an ultrasonic transducer for primary liquid level sensing, redundant float controls, and an autodialer alarm. VFDs were also included in the lift station controls.
U.S. Army Corps of Engineers|Coyote Valley Dam, CA|1,120 GPM - 150' TDH
This unique package wastewater lift station was designed to meet the high sewage flows of this US Army Corps of Engineers managed reservoir and nearby campgrounds. Vertical chopper pumps were engineered above the sump in a precast concrete structure with the above grade valve assembly. Two inlet lines were engineered with extra piping to direct influent toward the bottom of the sump. The structure also contains the UL listed control panel. Float controls were used for liquid level-sensing, and the control panel included soft starters typical for vertical shaft pumps.
Orange County, California|Anaheim, CA|4,500 GPM - 32.5' TDH
To create new potable water, this lift station pumps clean stormwater from a collection/storage basin to a treatment facility. Duplex vertical turbine pumps move high flows of water very efficiently and use soft starters to reduce torque on the vertical shaft and provide additional pump diagnostics. Also included is an above-grade valve assembly on the top slab. The control panel utilizes an ultrasonic transducer for primary level controls and a pressure transducer for backup. The entire package lift station is located inside an owner-supplied control building.
Channel Islands University|Camarillo, CA|2,500 GPM - 25' TDH
A university needed this package stormwater pump station designed to meet the high flow requirements for draining a detention pond. A flooded inlet line from the detention pond is pumped by submersible centrifugal pumps in a duplex configuration.





