Complete Stormwater Pump Station

International-Matex Tank Terminals|Richmond, CA|770 GPM - 35' TDH

jweddell500gpm - 1,000gpm, Corrosive/ Caustic Pumping, Inlet Outlet Structures, Oil/Water Separators, Pacific, Stormwater, Stormwater Runoff

An IMTT industrial storage facility needed this stormwater pump station to collect runoff and pump it to treatment onsite. The duplex submersible pumps were engineered to handle the expected medium flows of stormwater. The pumps also needed to handle water that could potentially carry oil or other industrial chemicals stored on the site. An above-grade valve assembly used ball valves and check valves that were vertically integrated for easy access. The pump station electrical controls were located on an existing wall in the water treatment area.

Sacramento Municipal Utility District

Municipal Utility District | Sacramento, CA | 172 GPM - 94' TDH

jweddell100gpm - 300gpm, Detention Pond Pumping, Detention Ponds, Flood Control, Inlet Outlet Structures, Municipal Collection, Pacific, Stormwater Runoff, Wastewater

The newly constructed headquarters for the Sacramento Municipal Utility District purchased this package lift station to meet its medium sewage flow requirements. Submersible solids-handling pumps in a duplex configuration were specified in a deep well because this facility represents one of the ten largest public utilities in the country.

Official Logo for Orange County Water Distrct

Orange County, California|Anaheim, CA|4,500 GPM - 32.5' TDH

jweddell1,000gpm - 5,000gpm, Booster Pump Station, Clean Water Intake, Design and Engineering, Detention Ponds, Domestic Booster Systems, Domestic Water Development, Inlet Outlet Structures, Pacific, Potable Water, Stormwater, Stormwater Runoff, Water Recharge, Water Reuse

To create new potable water, this lift station pumps clean stormwater from a collection/storage basin to a treatment facility. Duplex vertical turbine pumps move high flows of water very efficiently and use soft starters to reduce torque on the vertical shaft and provide additional pump diagnostics. Also included is an above-grade valve assembly on the top slab. The control panel utilizes an ultrasonic transducer for primary level controls and a pressure transducer for backup. The entire package lift station is located inside an owner-supplied control building.