A large neighborhood received these two lift stations that were designed to handle medium sewage flow requirements. The submersible solids-handling pumps in duplex configurations were specified to handle influent from three inlet lines from different sections of the neighborhood. The below-grade valve assemblies hold the system operation valves, bypass pumping ports, and shut-off valves. The outdoor UL listed control panels utilize pressure transducers and redundant float controls for liquid level-sensing; basic alarms were included for communications.
King Sooper?s Marketplace|Fort Collins, CO|150 GPM - 6.8' TDH
The food & drug store serving a nearby university needed this replacement package wastewater lift station for medium flow rates. Submersible solids handling pumps are designed to operate with suspended grease in the water from a cafeteria in the market. The lift station valves are vertically integrated into the sump discharge piping. An indoor UL listed control panel contains an intrinsically safe barrier for the in-well electrical controls, and an autodialer and basic alarm fulfill communication requirements. Floats are the primary and backup level-sensing control devices.
The City of Shafter|Shafter, CA|110 GPM - 28.4' TDH
This package lift station is part of a sustained plan to expand the collection system of a large sewage treatment plant completed in 1999. The medium flow is handled by submersible solids handling pumps in a duplex configuration. A pigging port, plug valve, shut off valve, mechanical indicator, back flow actuator, and swing check valve are all contained in a below-grade valve vault. An outdoor control panel includes an autodialer for communications, conductive probes for level sensing, and an intrinsically safe barrier for in-well electrical controls.
Plantation Pipe Line|Polk County, GA|175 GPM - 90' TDH
This package stormwater lift station was configured to meet the medium runoff flow of this industrial property. One submersible centrifugal pump makes this a simplex station with an in-well check valve. The single pump handles high head conditions caused by 9,000 feet of 4” force main. Additional system valves are located in a below grade valve vault. An outdoor control panel includes floats for liquid level-sensing and a basic alarm for communication. A Thern crane was included with this station to raise and lower the pump.
Federal Training Center|Bruswick, GA|150 GPM - 30' TDH
This replacement wastewater lift station was designed to meet the medium sewage flow requirements of this federal training facility. Submersible solids-handling pumps in a duplex configuration pumps the effluent through in-well valves and out a three-inch force main. An outdoor alternator panel handles the controls for this package lift station. It was designed with floats for liquid level sensing and a basic alarm. The wet well is accessible with a traffic-rated hatch.