A new development for a commercial park needed this wastewater lift station to connect the development to the municipal sewer system. Submersible centrifugal pumps in a duplex configuration were engineered to meet the medium flow high head conditions of the force main. This system needs to pump at a predefined flow rate in order to achieve the minimum force to reach the existing municipal sewer lines. The lift station control panel is a UL listed panel with redundant float controls wired for intrinsically safe use.
The City of Wenatchee|Wenatchee, WA|375 GPM - 125' TDH
This municipal lift station replacement was configured to handle medium flows of sewage from a large area of Wenatchee, Washington. This deep wet well was constructed from precast concrete and includes Tnemec interior coating. Vaughan Chopper Pumps in a duplex configuration were selected to macerate solids and alternate pumping cycles. A PLC with a touchscreen interface provides an easy and flexible control panel. The primary level-sensing device is a pressure transducer with floats backup level-sensing. This control panel also uses soft starters to reduce current inrush to the 30 hp pumps.
University of Washington|Seattle, WA|346 GPM - 40' TDH
The renovation of the University of Washington’s Husky Stadium required a new lift station to handle medium flows of wastewater. Robust, 10hp Vaughan Chopper pumps were used in a duplex configuration to macerate solids and to pump under unpredictable conditions. The lift station, valve vault, and the access hatches were designed as traffic rated to accommodate loading/unloading next to the main grandstand. The UL listed control panel starts, stops, and alternates each pump cycle at levels measured by Noltaniva float sensors.
Tesoro Corporation|Port Angeles, WA|400 GPM - 30' TDH
A remote Tesoro Corporation industrial site needed this stormwater pump station to handle water discharged from an oil/water separator which processes on-site runoff. Submersible centrifugal pumps were used in a duplex configuration in this shallow wet well. The 7.5 hp Ebara explosion-proof pumps were sized to meet low flow, medium head conditions for stormwater. Check valves and plug valves were integrated into the discharge piping in the well for a simple and cost-effective design. The precast concrete wet well and the access hatch are both pedestrian rated.
Holt Homes | Camas, WA | 415 GPM - 117' TDH
A large residential development required this package lift station to meet the high sewage flows for over 330 residential lots. Two inlet lines are fitted with deflector panels to reduce the in-well turbidity and protect the duplex submersible solids handling pumps from cascading influent. A below-grade valve vault contains the system valves, access ports, and pressure gauges. A sheltered, outdoor control panel utilizes a pressure transducer and backup conductive probe for liquid level-sensing and is connected to an emergency backup generator.





