A large book distribution center required the local municipal agency to install this package wastewater lift station. The force main was installed via a horizontally drilled hole to the exact elevation of the wet well connection. The submersible solids handling pumps are explosion proof to meet the hazardous area classifications for this lift station. A sheltered PLC control panel contains an intrinsically safe barrier to also meet the hazardous area requirements. The panel utilizes a pressure transducer and floats for primary and backup level-sensing controls.
CCA Prison|Pahrump, NV|836 GPM - 72' TDH
These four package lift stations were designed to meet the high sewage flows of this commercial prison for municipal wastewater standards. Solids-handling pumps in a duplex configuration are aided by an effluent mixer designed to agitate solids inmates put into the system. A dual compartment, below-grade valve assembly holds the complete system valves and flow meters. The PLC panel is tied-in to an onsite generator for emergency backup power. A SCADA system handles liquid level sensing with a pressure transducer and floats for backup.
The Marke Luxury Apartments|Santa Ana, CA|3,591 GPM - 24.8' TDH
This stormwater pump station was designed to handle variable flows of stormwater runoff. The typical stormwater expectations called for low flow pumping, but this pump station needed to handle high flows as well. Two different sizes of submersible centrifugal pumps were used; a 7.5 hp pump and a 25 hp pump. The pumps required differently sized discharge piping and valves for each pump. A PLC control panel handles all lift station functions including starting and stopping on level, SCADA options, an autodialer for communications, and a soft starter for the large pump.
Exxon Mobil|Chalmette, LA|30,000 GPM - Various TDH
To address the industrial stormwater concerns of coastal Louisiana, this large, precast concrete pump station was designed to meet super-high flows of runoff at this Exxon refinery. Five vertical turbine pumps and three submersible pumps, capable of pumping 60,000 GPM, are spread across three large interconnected rectangular wet wells. This approach was much more affordable than a single poured in place sump, and the connection tubes make the functionality near identical. A robust steel baffle slows incoming stormwater at the inlet line to reduce turbulence and wear on the sump components.
Suncadia Resort|Cle Elum, WA|800 GPM - 175' TDH
A growing resort community with golf courses needed this Romtec Utilities package lift station to meet super high sewage flows with high head conditions. The resort has ample property for expansion and needed a wastewater lift station that would also expand. Two submersible solids handling pumps were included in the original supply, but the mounting hardware for a third pump in a triplex configuration was included to allow easy expansion as more condos are constructed. An outdoor control panel is protected by a shelter and utilizes a pressure transducer and backup floats for liquid level-sensing.





