An RV park needed this package lift station to meet the municipal sewage requirements for the residents at the park. Pumping with low flow and low head conditions, the duplex Goulds submersible pumps are sized to efficiently fit the 14’ deep, 4’ diameter wet well. An outdoor UL listed control panel utilizes floats for liquid level-sensing and includes an autodialer for communications and alarm notifications. The complete system was installed at finish grade with traffic rated hatches to provide a low profile for the residential area.
Dow Chemical Company|Plaquemine, LA|350 GPM - 90' TDH
This package wastewater lift station replacement was delivered largely preassembled for quick and simple installation by the customer. This procedure provided an expertly designed lift station that would uphold the privacy values of the facility. The fiberglass wet well arrived with mounting hardware, discharge piping, and the valve assembly preinstalled. Only the duplex solids handling pumps needed to be lowered after installation of the sump. An outdoor UL listed control panel was designed with float controls for liquid level-sensing and included an autodialer for communications.
PG&E Power Plant|Colusa, CA|300 GPM - 23' TDH
These three package lift stations were designed to meet medium flows of industrial process water with added low flows of industrial stormwater and wastewater. Submersible centrifugal pumps in a duplex configuration were specified to meet the peak flows and water chemistry identified for each pump station. UL listed control panels with floats for liquid level-sensing and basic alarms comprise the system controls for the lift stations. These packaged lift stations were integrated into stormwater, processing, and wastewater plans for the new construction of the Colusa Generating Station.
Commercial Development | Newark, DE | 60 GPM - 16' TDH
A commercial development in Delaware required this wastewater lift station to handle low flows of sewage from a new fast food restaurant and retail stores. Tsurumi cutter pumps in a duplex configuration macerate solids any in the wastewater to pass through the force main diameter. This lift station pumps a short distance with low head to a nearby gravity collection system that flows to treatment. A UL listed control panel was supplied for complete electrical controls with Nolta Niva floats for in-well liquid level-sensing.
City of Brawley Water Treatment | Brawley, CA | 1,350 GPM - 25' TDH
The City of Brawley needed this packaged lift station to handle high flows of wastewater at its municipal treatment plant. 12 HP submersible pumps in a duplex configuration were used to meet the high flow pumping needs and a conductive probe was used for liquid level-sensing. The in-ground valve assembly and meter assembly were each located in separate vault structures for a cost effective design and easy access. An outdoor, UL listed control panel was protected from weather and sunlight by a six-post shelter, which also covers the sump entry hatch and electric disconnect panel.