The City of the Dalles required this replacement package lift station to meet medium flows of municipal wastewater. This lift station included submersible centrifugal pumps in a duplex configuration with the ability to handle some suspended solids. The control panel for this lift station includes SCADA software to interact with a remote telemetry unit (RTU). These two systems provide communications from the pressure transducer and conductive probe level sensing devices. They also communicate calculated flow rates and any voltage variances in from the power supply.
CCA Prison|Pahrump, NV|836 GPM - 72' TDH
These four package lift stations were designed to meet the high sewage flows of this commercial prison for municipal wastewater standards. Solids-handling pumps in a duplex configuration are aided by an effluent mixer designed to agitate solids inmates put into the system. A dual compartment, below-grade valve assembly holds the complete system valves and flow meters. The PLC panel is tied-in to an onsite generator for emergency backup power. A SCADA system handles liquid level sensing with a pressure transducer and floats for backup.
Clark County, Washington|Vancouver, WA|198 GPM - 51' TDH
This package lift station was designed to meet municipal standards for medium sewage flows at this new commercial complex. The duplex pump configuration and solids-handling pumps provide suitable preventative measures for a reliable and long-term wastewater lift station. The below-grade valve assembly included swing check valves, a pigging port, and flow meters. An on-site permanent generator and sheltered outdoor PLC control panel provide robust and programmable lift station controls. An ultrasonic transducer and a two float backup comprise the liquid level sensing controls.
Residential Development Wastewater Lift Station for City of Salinas, CA
50 GPM
17.4′ TDH
This lift station was designed to meet the low sewage flow requirements of a municipal lift station for a new residential development. The duplex pump configuration, solids-handling pumps, and inlet-line drop bowl provide suitable preventative measures for a reliable and long-term wastewater lift station. The controller is a PLC type designed with a pressure transducer for primary level sensing and a two float system for backup. The entire electrical was configured for Ethernet communication and alarm notification output to an existing SCADA system.
Clark County, Washington|Vancouver, WA|325 GPM - 48' TDH
This lift station was designed to meet the medium sewage flow requirements of a municipal lift station. The duplex pump configuration and backup level sensing provide suitable redundancy for a reliable and long-term wastewater lift station. Solids-handling pumps designed for wastewater were supplied to eliminate clogging concerns. A sheltered outdoor PLC control panel provides robust and programmable lift station controls. This lift station also includes a permanent on-site generator to guarantee continued system operation.