City of Brawley

City of Brawley Water Treatment | Brawley, CA | 1,350 GPM - 25' TDH

jweddell1,000gpm - 5,000gpm, Control Buildings Shelters, First Flush, Meter Vaults, Municipal Collection, Pacific, Process Water, Treatment Plants, Wastewater, Water Recirculation, Water Reuse

The City of Brawley needed this packaged lift station to handle high flows of wastewater at its municipal treatment plant. 12 HP submersible pumps in a duplex configuration were used to meet the high flow pumping needs and a conductive probe was used for liquid level-sensing. The in-ground valve assembly and meter assembly were each located in separate vault structures for a cost effective design and easy access. An outdoor, UL listed control panel was protected from weather and sunlight by a six-post shelter, which also covers the sump entry hatch and electric disconnect panel.

Los Angeles Trade and Technical College

Los Angeles Trade and Tech College|Los Angeles, CA|600 GPM - 26.2' TDH

jweddell500gpm - 1,000gpm, Pacific, Schools, Stormwater, Stormwater Runoff

The expansion of a college campus required this stormwater pump station to handle medium flows of stormwater runoff. To meet the required pumping rate, 7.5 hp Ebara submersible centrifugal pumps were designed in a duplex configuration. This pumping system was designed with dual force mains and check valves integrated in the discharge piping to simplify the engineering for the system. Romtec Utilities provided the complete electrical engineering plans for the UL listed control panel. Floats for primary and backup liquid level-sensing were supplied to give the system added redundancy.

Marine Corps Base Camp Pendleton

US Marine Corps Base|Camp Pendleton, CA|1,585 GPM - 25' TDH

jweddell1,000gpm - 5,000gpm, Grinder Vault, Military Installations, Municipal Collection, Pacific, Sewer System Expansion, Slurry/Gritty Water, Wastewater

The Marine Corps Base Camp Pendleton needed this large wet-dry wastewater lift station to replace an existing system to allow the construction of new enlisted quarters. The new lift station included triplex dry-pit pumps to handle super-high flows of sewage from the facilities. An 8’ diameter precast concrete sump collects the sewage. Suction lines connect the sump to a 200-square-foot rectangular dry pit where the pumps, flow meter, and valve assembly are located. This lift station also includes an upstream grinder pit with a Macho Monster sewage grinder to pulverize solids into passable sizes.

Solyndra Commercial Complex

Solyndra|Fremont, CA|450 GPM - 35' TDH

jweddell300gpm - 500gpm, Pacific, Stormwater, Stormwater Runoff

This new commercial complex required two new stormwater pump stations designed to meet low flows of runoff. The manholes and hatches were designed at grade to integrate seamlessly with the brick patio and walkway. Submersible centrifugal pumps in a duplex configuration discharge to below grade valve assemblies accessible by valves cans. The UL listed control panels are contained by stainless steel NEMA enclosures and include intrinsically safe barriers. Both lift stations were designed with the same primary components for site standardization.

City of Arcata

The City of Arcata | Arcata, CA | 2,947 GPM - 34.2' TDH

jweddell1,000gpm - 5,000gpm, Municipal Collection, Municipal Lift Station Replacement, Pacific, Wastewater

This “turnkey” replacement lift station was designed, supplied, and installed to meet super-high sewage flow with infiltration and inflow requirements of a municipal wastewater lift station. Submersible solids-handling pumps in a triplex configuration were installed. The below-grade valve assembly includes plug valves, check valves, ball valves, a pumping port, and a pigging port. The UL listed control panel has an ultrasonic transducer for primary liquid level sensing, redundant float controls, and an autodialer alarm. VFDs were also included in the lift station controls.